ZM02 Digital MEMS combustible gas sensor
- Product SKU: INFZM02
- Category:Best selling products,Home page,Winsen Sensors
Application:Environmental monitoring,Portable device,Health care,Site control
Feature:MEMS technology,Ultra-low power consumption,Fast response and resume,High sensitivity.
Production Description:
Digital MEMS combustible gas sensor is using MEMS micro-fabrication hot plate on a Si substrate base, gas-sensitive materials used in the clean air with low conductivity metal oxide semiconductor material. When the sensor exposed to gas atmosphere, the conductivity is changing as the detected gas concentration in the air. The higher the concentration of the gas, the higher the conductivity. Use simple circuit can convert the change of conductivity of the gas concentration corresponding to the output signal. The sensor is high sensitivity, compact and precise. There are 2 pins are preset as alarm trigger signal output. It can be widely used in environmental safety, portable instruments and many other areas.
Feature:
- MEMS technology
- Ultra-low power consumption
- Fast response and resume
- High sensitivity
- Anti-electromagnetic interference
Application:
- Environmental monitoring
- Portable device
- Health care
- Site control
Technical Parameters:
Working Voltage |
2.8-3.3V |
Working Current |
0.3mA |
|
|
|
|
Heater current |
25mA |
Max. heating power |
80mW |
|
|
|
|
Min. Detection Level |
1%LEL |
Max. Detection level |
25%LEL |
|
|
|
|
Working humidity |
5%-95% Rh |
Storage humidity |
5%-95% Rh |
|
|
|
|
Working Temperature |
-20-70℃ |
Storage Temperature |
-40-85℃ |
Application:Environmental monitoring,Portable device,Health care,Site control
Feature:MEMS technology,Ultra-low power consumption,Fast response and resume,High sensitivity.
Production Description:
Digital MEMS combustible gas sensor is using MEMS micro-fabrication hot plate on a Si substrate base, gas-sensitive materials used in the clean air with low conductivity metal oxide semiconductor material. When the sensor exposed to gas atmosphere, the conductivity is changing as the detected gas concentration in the air. The higher the concentration of the gas, the higher the conductivity. Use simple circuit can convert the change of conductivity of the gas concentration corresponding to the output signal. The sensor is high sensitivity, compact and precise. There are 2 pins are preset as alarm trigger signal output. It can be widely used in environmental safety, portable instruments and many other areas.
Feature:
- MEMS technology
- Ultra-low power consumption
- Fast response and resume
- High sensitivity
- Anti-electromagnetic interference
Application:
- Environmental monitoring
- Portable device
- Health care
- Site control
Technical Parameters:
Working Voltage |
2.8-3.3V |
Working Current |
0.3mA |
|
|
|
|
Heater current |
25mA |
Max. heating power |
80mW |
|
|
|
|
Min. Detection Level |
1%LEL |
Max. Detection level |
25%LEL |
|
|
|
|
Working humidity |
5%-95% Rh |
Storage humidity |
5%-95% Rh |
|
|
|
|
Working Temperature |
-20-70℃ |
Storage Temperature |
-40-85℃ |